GNS3 Lab & Exercise: OSPF Case Study & Lab Scenario 3
Written by LBSources from http://www.gns3-labs.com on August 13th, 2010 | 26 CommentsHow are we doing? So! As for me, I’ve beat the deadline for my CCNA expiration as well as the BSCI deadline! Wohoo! Very happy to say the least. Right now I’m working on SWITCH and hope to have this completed by the end of September.. There is a new site online that took the [...]
GNS3 Lab & Exercise: EIGRP & OSPF Route Manipulation
Written by LBSources from http://www.gns3-labs.com on June 26th, 2010 | 3 CommentsSo here is another lab I put together based on some studies and reading recently. I basically put together the scenario, so if it’s lacking conveying the scenario in a professional manner, I apologize This is basically a simple route redistribution and route manipulation lab. Simple, but requires a few steps that will test your [...]
GNS3 Lab & Exercise: OSPF Case Study & Lab Scenario 2
Written by LBSources from http://www.gns3-labs.com on June 19th, 2010 | 3 CommentsHow are we doing? I’m continuing on working to complete this lab book and all the labs This is another OSPF related lab from the Cisco Networking Academy Lab Portfolio. No EIGRP or other protocols involved. This lab involves the use of sub-interfaces, which changes your frame-relay statements – watch out and don’t get too [...]
GNS3 Lab & Exercise: GNS3-Labs BSCI Lab OSPF Stub, Total Stub Areas & Route Redistribution
Written by LBSources from http://www.gns3-labs.com on April 9th, 2010 | 4 CommentsOk – So here is another CCNP BSCI / CCNA lab challenge. This lab is part of Chris Bryant’s CCNP lab manual. This is my second visit to these labs after completing the reading material and not having to look at a single bit of the guide for help to config this up! Impressive to [...]
GNS3 Lab & Exercise: OSPF Hub-And-Spoke & Virtual Links
Written by LBSources from http://www.gns3-labs.com on March 4th, 2010 | 7 CommentsOk – So here is another CCNP BSCI / CCNA lab challenge. This lab is part of Chris Bryant’s CCNP lab manual. I haven’t included the solutions yet – I’ll give it some time and post that later .. First work on completing the lab and getting it to all work per the challenge. Ok [...]
GNS3 Topology: Featuring – Virtual Area Links, Multi and Inter Area OSPF & Some Redistribution
Written by LBSources from http://www.gns3-labs.com on November 21st, 2008 | 12 CommentsFound a nice OSPF lab over at the GNS3.net forums, but it wasn’t properly exported and packaged. So I did what I always do .. Put it together, cleaned it up and tested and it works flawlessly. Very nice lab with virtual area links, RIP redistribution, inter-area and multi-area OSPF. Routers Used: 3640 IOS: c3640-ik9o3s-mz.124-17a [...]
Topology: Cisco Networkers 2008 – LABCRT-2106-OSPF-Start
Written by LBSources from http://www.gns3-labs.com on August 28th, 2008 | 11 CommentsWe have another great helper to the site. Mike Litka has shared a topology he put together while at Cisco Networkers 2008. He also put these labs together using the DynaSlaxGNS3 livecd. He has always had issues with GNS3 crashing on his pc, but since using the livecd he’s had no problems at all. Give [...]
Topology: Chris Bryant Core Lab Architecture – 3640 Routers
Written by LBSources from http://www.gns3-labs.com on May 31st, 2008 | 5 CommentsThese are the setups for the Chris Bryant labs. So if you’re studying for your CCNP and working with Chris’ material this is what you need! Routers Used: 3640 IOS: c3640-jk9s-mz.124-16a Feature of Topology: Core lab from Chris Bryant CCNP Study package.
Subscribe to GNS3 Labs :: Cisco Router Simulator Network Topologies
