GNS3 Topology: MPLS VPN and Traffic Engineering
Written by pierky from http://pierky.tel/ on January 23rd, 2009 | 51 CommentsAnother great lab from Pierky! Thanks!! Routers P1, P2, P3 and P4 are in the core, just running OSPF in area 0. Each router has Loopback 0 with address 10.0.1.x (where x is the router number – P1 = 10.0.1.1). Provider-edge routers PE1, PE2, PE3 and PE4 run OSPF in area 0 too; they have [...]
GNS3-Topology: EvilRouters- BGP Over Multilink PPP Lab
Written by LBSources from http://www.gns3-labs.com on January 11th, 2009 | 4 CommentsBGP for me is one hell of an interesting routing protocol. Until I got into working with enterprise networks, I never realized how much it was used. After working with it now for about 2 years, it’s really grown on me and is a part of the CCNP study which I cant wait to make [...]
GNS3-Topology: EvilRouters – Multilink-PPP Lab
Written by LBSources from http://www.gns3-labs.com on December 21st, 2008 | 1 CommentMy buddy Jeremy over at EvilRouters does a great job at taking you through his labs. He includes great details and steps to getting the configurations and challenge completed. He also speaks in very simple terms which shows he cares about people understanding more than he likes hearing himself talk technical. The lab below is [...]
GNS3 Topology: BSCI – EIGRP & ISIS Redistribution Lab
Written by LBSources from http://www.gns3-labs.com on December 1st, 2008 | 5 CommentsOn November 15th I posted a lab contributed:BSCI OSPF Excercise Sim Question From Jim Shank. The lab was a great excercise where Jim pitched a scenario and requirement and the solution. Great lab! Jim sent me a new lab to share which is even better and has often proven to be a challenge for many. [...]
GNS3 Topology: EvilRouters.Net – Basic IPSec VPN Over Frame-Relay Lab
Written by LBSources from http://www.gns3-labs.com on November 23rd, 2008 | 2 CommentsJeremy (AKA Jlgaddis) over at EvilRouters.net created 2 cool labs. 1 was a basic frame-relay lab and the other was adding IPSec VPN to the lab. He gave some great details and outlined the configuration – step by step. I compiled the lab for GNS3 specifically. Jeremy has an awesome blog .. check him out [...]
GNS3 Topology: Multicasting – PIM Sparse-Mode – Anycast RP and MSDP – IPmc Lab
Written by pierky from http://pierky.tel/ on November 22nd, 2008 | 13 CommentsHere is a very new lab to GNS3-Labs which we havent had before. We have plenty of OSPF, RIP and all the other common routing protocols and what not. Pierky has created this very cool lab featuring Multicast, PIM Sparse-mode, Anycast RP, MSDP. Hope you enjoy! A source (Sender) needs to send a multicast ping [...]
BSCI OSPF Excercise Sim Question From Jim Shank
Written by LBSources from http://www.gns3-labs.com on November 15th, 2008 | 4 CommentsA fellow reader by the name of Jim has submitted a great SIM lab for all of us BSCI seekers. In the lab he provides a scenario and within the archive he provides a solution file with all the steps to correctly solve the lab. Jim put some great effort into putting the lab together [...]
Topology: Configuring BGP with Default Routing Lab 6-1
Written by LBSources from http://www.gns3-labs.com on July 12th, 2008 | 14 CommentsHey folks it seems we have a helper who is willing to share labs with us all! His name is Amir Hussain and he will be sharing his labs based on the BSCI v50 Lab Guide by Cisco. You too can share your labs and co-admin this site by shooting me an email at postmy [AT] [...]
Subscribe to GNS3 Labs :: Cisco Router Simulator Network Topologies
