GNS3 Lab & Exercise: GNS3-Labs - BGP & EIGRP Case Study 4

Hello All! Hope your weekend and holiday has been a great one!
Here is another one of the final Cisco Network Academy labs. This one involves BGP and EIGRP. A lot of good tasks in this case scenario. I wish that they would have had many more lab scenarios since they are exactly whats on the [...]

GNS3 Lab & Exercise: EIGRP & OSPF Route Manipulation

So here is another lab I put together based on some studies and reading recently. I basically put together the scenario, so if it’s lacking conveying the scenario in a professional manner, I apologize
This is basically a simple route redistribution and route manipulation lab. Simple, but requires a few steps that will test [...]

GNS3 Lab & Exercise: OSPF Case Study & Lab Scenario 2

How are we doing? I’m continuing on working to complete this lab book and all the labs
This is another OSPF related lab from the Cisco Networking Academy Lab Portfolio. No EIGRP or other protocols involved. This lab involves the use of sub-interfaces, which changes your frame-relay statements - watch out and don’t get [...]

GNS3 Lab & Exercise: EIGRP & OSPF Case Study - Lab Scenario

Alright - Moving on and getting into some lab scenarios. No need to explain too much, all the information is below.
This is a lab from the Cisco Networking Academy Lab Portfolio.
CCNP Building Scalable Internetworks (BSCI 642-901) Lab Portfolio (Cisco Networking Academy)
Instructions
Plan, design, and implement the complex International Travel Agency (ITA)
EIGRP network based on [...]

GNS3-Lab & Exercise - BGP Route Reflectors & Filters

Hope you are all doing well and celebrating the achievement of your CCNP or preparing to sit the exam very soon! Good luck.
Here goes the last of this BGP lab series - Next up? We’ll see! This lab will teach you how to configure a Route Reflector in BGP, you’ll learn how this type of [...]

GNS3 Lab & Exercise: Configuring IBGP and EBGP Sessions, Local Preference and MED

Keeping it going with BGP here! This is basically lab 3 from the lab portfolio. This one adds some EIGRP into the mix to help demonstrate how to get IGP routes into the routing tables and how that affects the overall routing including BGP.
This lab includes working with IBGP EBGP, the local preference and the [...]

GNS3 Lab & Excercise: BGP & The AS_Path Attribute

Ok - this is another BGP lab from the CCNP Cisco Networking Academy Lab Portforlio.
CCNP Building Scalable Internetworks (BSCI 642-901) Lab Portfolio (Cisco Networking Academy)
Though I’m a bit further than this lab I’m posting, I’m just trying to catch up and share the labs when I can. 2 days in a row I’m posting, [...]

GNS3 Lab & Exercise: BGP Lab - Configuring BGP with Default Routing

Greetings! Hope everyone is wrapping up their CCNP certifications before the July 31st deadlines. If you are still confused about what certs are valid after the deadline and want to know which you should be taking, have a look over here at my attempt to explaining it all.
I’ve been busy trying to absorb all of [...]

GNS3 Lab & Exercise: GNS3-Labs BSCI Lab OSPF Stub, Total Stub Areas & Route Redistribution

Ok - So here is another CCNP BSCI / CCNA lab challenge. This lab is part of Chris Bryant’s CCNP lab manual.
This is my second visit to these labs after completing the reading material and not having to look at a single bit of the guide for help to config this up! Impressive to me, [...]

GNS3 Lab & Exercise: CCNA - CCNP ROUTE - EIGRP Lab

So as expected - we’re going to start seeing some folks rolling out labs that are based on the new CCNP track topologies. This new submission comes from Steve - He turned multiple CCNP ROUTE study exercises into a full EIGRP lab exercise as best as he can while covering almost everything possible in regards [...]

GNS3 Lab & Exercise: OSPF Hub-And-Spoke & Virtual Links

Ok - So here is another CCNP BSCI / CCNA lab challenge. This lab is part of Chris Bryant’s CCNP lab manual. I haven’t included the solutions yet - I’ll give it some time and post that later .. First work on completing the lab and getting it to all work per the challenge.
Ok [...]

GNS3-Topology: Small Site Multihoming

Hey we have another contributed lab. This one comes from Brahadesh.. He put together a little lab based on a exercise from another site and contributed it here to us.
It’s great that you can find an exercise on the internet, whip it up real quick, work on it and share it afterward. It’s amazing how [...]

GNS3-Topology: Dual WAN connection on Cisco with Policy-based routing (PBR)

Pierky put together a great exercise lab giving you a scenario and objective. The solution is in a DOC file in the archive package.
Scenario
We have a router connected to the ISP with two WAN connections:
- a Bronze link, with little bandwidth, on which we have a /30 subnet;
- a Gold link, with good performances, on [...]

GNS3-Topology: EvilRouters-Weighting To Influence BGP Routing

This is an older lab that is part of the BGP series labs that Jeremy over at EvilRouters.net is building. The labs are great and they will surely serve someone some great lab experience by the time hes done with them all.
This lab picks up from:

EvilRouters.net - Configuring Basic BGP
GNS3-Topology: EvilRouters- BGP Over Multilink PPP [...]

GNS3 Topology: MPLS VPN and Traffic Engineering

Another great lab from Pierky! Thanks!!
Routers P1, P2, P3 and P4 are in the core, just running OSPF in area 0. Each router has Loopback 0 with address 10.0.1.x (where x is the router number - P1 = 10.0.1.1).
Provider-edge routers PE1, PE2, PE3 and PE4 run OSPF in area 0 too; they have Loopback 0 [...]