GNS3-Topology: CCNA & CCNP Full Mesh Topology Template
Written by LBSources from http://www.gns3-labs.com on December 1st, 2008 | 2 CommentsChris sent me a lab which he says has helped him to work on about 95% of his CCNA and CCNP lab requirements. I think this is a clear sign that using Dynamips or GNS3 can be effective in a big way with exam preperation. That 5% left over can be achieved in a few [...]
GNS3 Topology: Basic IPSec VPN Over Frame-Relay Lab
Written by LBSources from http://www.gns3-labs.com on November 23rd, 2008 | 1 CommentJeremy (AKA Jlgaddis) over at EvilRouters.net created 2 cool labs. 1 was a basic frame-relay lab and the other was adding IPSec VPN to the lab. He gave some great details and outlined the configuration - step by step. I compiled the lab for GNS3 specifically.
Jeremy has an awesome blog .. check him out @ [...]
BSCI OSPF Excercise Sim Question From Jim Shank
Written by LBSources from http://www.gns3-labs.com on November 15th, 2008 | 2 CommentsA fellow reader by the name of Jim has submitted a great SIM lab for all of us BSCI seekers. In the lab he provides a scenario and within the archive he provides a solution file with all the steps to correctly solve the lab. Jim put some great effort into putting the lab together [...]
Topology: Cisco Networkers 2008 - LABCRT-2106-OSPF-Start
Written by LBSources from http://www.gns3-labs.com on August 28th, 2008 | 9 CommentsWe have another great helper to the site. Mike Litka has shared a topology he put together while at Cisco Networkers 2008.
He also put these labs together using the DynaSlaxGNS3 livecd. He has always had issues with GNS3 crashing on his pc, but since using the livecd he’s had no problems at all. Give the [...]
Topology: DUAL DMVPN- Dynamic Multipoint VPN Over Frame-Relay Using EIGRP
Written by LBSources from http://www.gns3-labs.com on July 9th, 2008 | 0 CommentsThis is a DMVPN lab taken from this thread. The author of the post pitched a scenario by which he wanted folks to submit their work showing their attempt at it.
This is the scenario…..
DUAL HUB DMVPN Challenge:
A customer has hired you to configure 4 routers for them. Their requirements are listed below, keep in [...]
Video Tutorials: Setup VMWare In GNS3 and Dynamips-Dynagen And Simple Relay Lab
Written by LBSources from http://www.gns3-labs.com on June 17th, 2008 | 3 CommentsThese are links to videos created by Timw of hacki.at. Timw is a helpful guy on the forums over there and took time to create some videos on configuring VMWare to work with Dynamips/Dynagen & GNS3. In one of the Videos he also teaches you how to setup a simple frame-relay lab.
Video 1: VMWare Server [...]
Topology: BlindHogs How To build A Frame Relay Lab
Written by LBSources from http://www.gns3-labs.com on June 5th, 2008 | 0 CommentsThese labs were built based on BlindHogs’ How To build A Frame Relay Lab
Routers Used: 3640
IOS: c3640-jk9s-mz.124-16a
Feature of Topology: Build a frame-relay network using a hub and spoke architecture.
Subscribe to GNS3 Labs :: Cisco Router Simulator Network Topologies