Topology: Cisco Networkers 2008 – LABCRT-2106-OSPF-Start
Written by LBSources from http://www.gns3-labs.com on August 28th, 2008 | 11 CommentsWe have another great helper to the site. Mike Litka has shared a topology he put together while at Cisco Networkers 2008. He also put these labs together using the DynaSlaxGNS3 livecd. He has always had issues with GNS3 crashing on his pc, but since using the livecd he’s had no problems at all. Give [...]
Topology: Configuring BGP with Default Routing Lab 6-1
Written by LBSources from http://www.gns3-labs.com on July 12th, 2008 | 14 CommentsHey folks it seems we have a helper who is willing to share labs with us all! His name is Amir Hussain and he will be sharing his labs based on the BSCI v50 Lab Guide by Cisco. You too can share your labs and co-admin this site by shooting me an email at postmy [AT] [...]
Topology: DUAL DMVPN- Dynamic Multipoint VPN Over Frame-Relay Using EIGRP
Written by LBSources from http://www.gns3-labs.com on July 9th, 2008 | 1 CommentThis is a DMVPN lab taken from this thread. The author of the post pitched a scenario by which he wanted folks to submit their work showing their attempt at it. This is the scenario….. DUAL HUB DMVPN Challenge: A customer has hired you to configure 4 routers for them. Their requirements are listed below, [...]
Topology: Multi-Homed VPN & Object Tracking – IP SLA – Floating Default Routes PLUS OSPF Over GRE Tunnel
Written by LBSources from http://www.gns3-labs.com on June 27th, 2008 | 2 CommentsThis lab is similar to Topology: Multi-Homed VPN & Object Tracking – IP SLA – Floating Default Routes. Call it “Part 2″ The only addition of to this lab is OSPF running over a GRE tunnel. Its currently using only 1 of the paths to get to the HQ (v284 router). In Part 3 I [...]
Topology: Multi-Homed VPN & Object Tracking – IP SLA – Floating Default Routes
Written by LBSources from http://www.gns3-labs.com on June 25th, 2008 | 4 CommentsThis lab was created based on a real world scenario and need. The need was to have 1 router at each end-point. One being the client side and the other being the side where their devices/services/apps reside (let’s call it the field). There is only one ISP at the client side and 2 available and [...]
Topology: Chris Bryant OSPF Lab – 3640 Routers
Written by LBSources from http://www.gns3-labs.com on May 31st, 2008 | 7 CommentsThese are the setups for the Chris Bryant labs. So if you’re studying for your CCNP and working with Chris’ material this is what you need! Routers Used: 3640 IOS: c3640-jk9s-mz.124-16a Feature of Topology: OSPF labs from Chris Bryant CCNP Study package.
Topology: Chris Bryant Core Lab Architecture – 3640 Routers
Written by LBSources from http://www.gns3-labs.com on May 31st, 2008 | 5 CommentsThese are the setups for the Chris Bryant labs. So if you’re studying for your CCNP and working with Chris’ material this is what you need! Routers Used: 3640 IOS: c3640-jk9s-mz.124-16a Feature of Topology: Core lab from Chris Bryant CCNP Study package.
Subscribe to GNS3 Labs :: Cisco Router Simulator Network Topologies
