Tag: CCNP

GNS3-Topology: CCNA & CCNP Full Mesh Topology Template

Written by LBSources from http://www.gns3-labs.com on December 1st, 2008 | 2 Comments

Chris sent me a lab which he says has helped him to work on about 95% of his CCNA and CCNP lab requirements. I think this is a clear sign that using Dynamips or GNS3 can be effective in a big way with exam preperation. That 5% left over can be achieved in a few [...]

GNS3 Topology: BSCI - EIGRP & ISIS Redistribution Lab

Written by LBSources from http://www.gns3-labs.com on December 1st, 2008 | 0 Comments

On November 15th I posted a lab contributed:BSCI OSPF Excercise Sim Question From Jim Shank. The lab was a great excercise where Jim pitched a scenario and requirement and the solution. Great lab! Jim sent me a new lab to share which is even better and has often proven to be a challenge for many. [...]

BSCI OSPF Excercise Sim Question From Jim Shank

Written by LBSources from http://www.gns3-labs.com on November 15th, 2008 | 2 Comments

A fellow reader by the name of Jim has submitted a great SIM lab for all of us BSCI seekers. In the lab he provides a scenario and within the archive he provides a solution file with all the steps to correctly solve the lab. Jim put some great effort into putting the lab together [...]

Topology: Multilayer Switching in a “Campus” Network

Written by pierky from http://www.linkedin.com/in/piercarlochiodi on September 22nd, 2008 | 8 Comments

Hey we have yet another great lab from a contributor. His name is Pierky and this is one great lab ..
You can also post your labs by sending them to me or by creating an account or making the post yourself and I will approve it once its complete ..
I’m working on CCNP BCMSN exam [...]

Topology: Cisco Networkers 2008 - LABCRT-2106-OSPF-Start

Written by LBSources from http://www.gns3-labs.com on August 28th, 2008 | 9 Comments

We have another great helper to the site. Mike Litka has shared a topology he put together while at Cisco Networkers 2008.
He also put these labs together using the DynaSlaxGNS3 livecd. He has always had issues with GNS3 crashing on his pc, but since using the livecd he’s had no problems at all. Give the [...]

Topology: Configuring BGP with Default Routing Lab 6-1

Written by LBSources from http://www.gns3-labs.com on July 12th, 2008 | 4 Comments

Hey folks it seems we have a helper who is willing to share labs with us all! His name is Amir Hussain and he will be sharing his labs based on the BSCI v50 Lab Guide by Cisco.
You too can share your labs and co-admin this site by shooting me an email at postmy [AT] gns3-labs [...]

Topology: DUAL DMVPN- Dynamic Multipoint VPN Over Frame-Relay Using EIGRP

Written by LBSources from http://www.gns3-labs.com on July 9th, 2008 | 0 Comments

This is a DMVPN lab taken from this thread. The author of the post pitched a scenario by which he wanted folks to submit their work showing their attempt at it.
This is the scenario…..
DUAL HUB DMVPN Challenge:
A customer has hired you to configure 4 routers for them. Their requirements are listed below, keep in [...]

Topology: Multi-Homed VPN & Object Tracking - IP SLA - Floating Default Routes PLUS OSPF Over GRE Tunnel

Written by LBSources from http://www.gns3-labs.com on June 27th, 2008 | 0 Comments

This lab is similar to Topology: Multi-Homed VPN & Object Tracking - IP SLA - Floating Default Routes. Call it “Part 2″
The only addition of to this lab is OSPF running over a GRE tunnel. Its currently using only 1 of the paths to get to the HQ (v284 router). In Part [...]

Topology: Multi-Homed VPN & Object Tracking - IP SLA - Floating Default Routes

Written by LBSources from http://www.gns3-labs.com on June 25th, 2008 | 2 Comments

This lab was created based on a real world scenario and need. The need was to have 1 router at each end-point. One being the client side and the other being the side where their devices/services/apps reside (let’s call it the field). There is only one ISP at the client side and 2 available and [...]

Topology: Chris Bryant OSPF Lab - 3640 Routers

Written by LBSources from http://www.gns3-labs.com on May 31st, 2008 | 2 Comments

These are the setups for the Chris Bryant labs. So if you’re studying for your CCNP and working with Chris’ material this is what you need!
Routers Used: 3640
IOS: c3640-jk9s-mz.124-16a
Feature of Topology: OSPF labs from Chris Bryant CCNP Study package.

Topology: Chris Bryant Core Lab Architecture - 3640 Routers

Written by LBSources from http://www.gns3-labs.com on May 31st, 2008 | 4 Comments

These are the setups for the Chris Bryant labs. So if you’re studying for your CCNP and working with Chris’ material this is what you need!
Routers Used: 3640
IOS: c3640-jk9s-mz.124-16a
Feature of Topology: Core lab from Chris Bryant CCNP Study package.



↓ Subscribe To GNS3-Labs ↓

Subscribe to GNS3 Labs :: Cisco Router Simulator Network Topologies