GNS3 Lab & Exercise: OSPF Case Study & Lab Scenario 3
Written by LBSources from http://www.gns3-labs.com on August 13th, 2010 | 20 CommentsHow are we doing? So! As for me, I’ve beat the deadline for my CCNA expiration as well as the BSCI deadline! Wohoo! Very happy to say the least. Right now I’m working on SWITCH and hope to have this completed by the end of September.. There is a new site online that took the [...]
GNS3 Lab & Exercise: GNS3-Labs – BGP & EIGRP Case Study 4
Written by LBSources from http://www.gns3-labs.com on July 6th, 2010 | 15 CommentsHello All! Hope your weekend and holiday has been a great one! Here is another one of the final Cisco Network Academy labs. This one involves BGP and EIGRP. A lot of good tasks in this case scenario. I wish that they would have had many more lab scenarios since they are exactly whats on [...]
GNS3 Lab & Exercise: EIGRP & OSPF Route Manipulation
Written by LBSources from http://www.gns3-labs.com on June 26th, 2010 | 3 CommentsSo here is another lab I put together based on some studies and reading recently. I basically put together the scenario, so if it’s lacking conveying the scenario in a professional manner, I apologize This is basically a simple route redistribution and route manipulation lab. Simple, but requires a few steps that will test your [...]
GNS3 Lab & Exercise: OSPF Case Study & Lab Scenario 2
Written by LBSources from http://www.gns3-labs.com on June 19th, 2010 | 2 CommentsHow are we doing? I’m continuing on working to complete this lab book and all the labs This is another OSPF related lab from the Cisco Networking Academy Lab Portfolio. No EIGRP or other protocols involved. This lab involves the use of sub-interfaces, which changes your frame-relay statements – watch out and don’t get too [...]
GNS3 Lab & Exercise: EIGRP & OSPF Case Study – Lab Scenario
Written by LBSources from http://www.gns3-labs.com on June 12th, 2010 | 3 CommentsAlright – Moving on and getting into some lab scenarios. No need to explain too much, all the information is below. This is a lab from the Cisco Networking Academy Lab Portfolio. CCNP Building Scalable Internetworks (BSCI 642-901) Lab Portfolio (Cisco Networking Academy) Instructions Plan, design, and implement the complex International Travel Agency (ITA) EIGRP [...]
GNS3-Lab & Exercise – BGP Route Reflectors & Filters
Written by LBSources from http://www.gns3-labs.com on June 4th, 2010 | 2 CommentsHope you are all doing well and celebrating the achievement of your CCNP or preparing to sit the exam very soon! Good luck. Here goes the last of this BGP lab series – Next up? We’ll see! This lab will teach you how to configure a Route Reflector in BGP, you’ll learn how this type [...]
GNS3 Lab & Exercise: Configuring IBGP and EBGP Sessions, Local Preference and MED
Written by LBSources from http://www.gns3-labs.com on May 27th, 2010 | 4 CommentsKeeping it going with BGP here! This is basically lab 3 from the lab portfolio. This one adds some EIGRP into the mix to help demonstrate how to get IGP routes into the routing tables and how that affects the overall routing including BGP. This lab includes working with IBGP EBGP, the local preference and [...]
GNS3 Lab & Excercise: BGP & The AS_Path Attribute
Written by LBSources from http://www.gns3-labs.com on May 26th, 2010 | 1 CommentOk – this is another BGP lab from the CCNP Cisco Networking Academy Lab Portforlio. CCNP Building Scalable Internetworks (BSCI 642-901) Lab Portfolio (Cisco Networking Academy) Though I’m a bit further than this lab I’m posting, I’m just trying to catch up and share the labs when I can. 2 days in a row I’m [...]
GNS3 Lab & Exercise: BGP Lab – Configuring BGP with Default Routing
Written by LBSources from http://www.gns3-labs.com on May 25th, 2010 | 0 CommentsGreetings! Hope everyone is wrapping up their CCNP certifications before the July 31st deadlines. If you are still confused about what certs are valid after the deadline and want to know which you should be taking, have a look over here at my attempt to explaining it all. I’ve been busy trying to absorb all [...]
GNS3 Lab & Exercise: GNS3-Labs BSCI Lab OSPF Stub, Total Stub Areas & Route Redistribution
Written by LBSources from http://www.gns3-labs.com on April 9th, 2010 | 4 CommentsOk – So here is another CCNP BSCI / CCNA lab challenge. This lab is part of Chris Bryant’s CCNP lab manual. This is my second visit to these labs after completing the reading material and not having to look at a single bit of the guide for help to config this up! Impressive to [...]
GNS3 Lab & Exercise: OSPF Hub-And-Spoke & Virtual Links
Written by LBSources from http://www.gns3-labs.com on March 4th, 2010 | 7 CommentsOk – So here is another CCNP BSCI / CCNA lab challenge. This lab is part of Chris Bryant’s CCNP lab manual. I haven’t included the solutions yet – I’ll give it some time and post that later .. First work on completing the lab and getting it to all work per the challenge. Ok [...]
GNS3 Topology: BSCI – EIGRP & ISIS Redistribution Lab
Written by LBSources from http://www.gns3-labs.com on December 1st, 2008 | 5 CommentsOn November 15th I posted a lab contributed:BSCI OSPF Excercise Sim Question From Jim Shank. The lab was a great excercise where Jim pitched a scenario and requirement and the solution. Great lab! Jim sent me a new lab to share which is even better and has often proven to be a challenge for many. [...]
BSCI OSPF Excercise Sim Question From Jim Shank
Written by LBSources from http://www.gns3-labs.com on November 15th, 2008 | 4 CommentsA fellow reader by the name of Jim has submitted a great SIM lab for all of us BSCI seekers. In the lab he provides a scenario and within the archive he provides a solution file with all the steps to correctly solve the lab. Jim put some great effort into putting the lab together [...]
Topology: Configuring BGP with Default Routing Lab 6-1
Written by LBSources from http://www.gns3-labs.com on July 12th, 2008 | 14 CommentsHey folks it seems we have a helper who is willing to share labs with us all! His name is Amir Hussain and he will be sharing his labs based on the BSCI v50 Lab Guide by Cisco. You too can share your labs and co-admin this site by shooting me an email at postmy [AT] [...]
Topology: Chris Bryant OSPF Lab – 3640 Routers
Written by LBSources from http://www.gns3-labs.com on May 31st, 2008 | 7 CommentsThese are the setups for the Chris Bryant labs. So if you’re studying for your CCNP and working with Chris’ material this is what you need! Routers Used: 3640 IOS: c3640-jk9s-mz.124-16a Feature of Topology: OSPF labs from Chris Bryant CCNP Study package.
Subscribe to GNS3 Labs :: Cisco Router Simulator Network Topologies
