Category: GNS3 Lab and Exercise

GNS3 Topology: BSCI - EIGRP & ISIS Redistribution Lab

Written by LBSources from http://www.gns3-labs.com on December 1st, 2008 | 0 Comments

On November 15th I posted a lab contributed:BSCI OSPF Excercise Sim Question From Jim Shank. The lab was a great excercise where Jim pitched a scenario and requirement and the solution. Great lab! Jim sent me a new lab to share which is even better and has often proven to be a challenge for many. [...]

GNS3 Topology: Multicasting - PIM Sparse-Mode - Anycast RP and MSDP - IPmc Lab

Written by pierky from http://www.linkedin.com/in/piercarlochiodi on November 22nd, 2008 | 2 Comments

Here is a very new lab to GNS3-Labs which we havent had before. We have plenty of OSPF, RIP and all the other common routing protocols and what not. Pierky has created this very cool lab featuring Multicast, PIM Sparse-mode, Anycast RP, MSDP. Hope you enjoy!
A source (Sender) needs to send a multicast ping to [...]

BSCI OSPF Excercise Sim Question From Jim Shank

Written by LBSources from http://www.gns3-labs.com on November 15th, 2008 | 2 Comments

A fellow reader by the name of Jim has submitted a great SIM lab for all of us BSCI seekers. In the lab he provides a scenario and within the archive he provides a solution file with all the steps to correctly solve the lab. Jim put some great effort into putting the lab together [...]

Topology: Configuring BGP with Default Routing Lab 6-1

Written by LBSources from http://www.gns3-labs.com on July 12th, 2008 | 4 Comments

Hey folks it seems we have a helper who is willing to share labs with us all! His name is Amir Hussain and he will be sharing his labs based on the BSCI v50 Lab Guide by Cisco.
You too can share your labs and co-admin this site by shooting me an email at postmy [AT] gns3-labs [...]

Topology: DUAL DMVPN- Dynamic Multipoint VPN Over Frame-Relay Using EIGRP

Written by LBSources from http://www.gns3-labs.com on July 9th, 2008 | 0 Comments

This is a DMVPN lab taken from this thread. The author of the post pitched a scenario by which he wanted folks to submit their work showing their attempt at it.
This is the scenario…..
DUAL HUB DMVPN Challenge:
A customer has hired you to configure 4 routers for them. Their requirements are listed below, keep in [...]

Topology: GNS3 GLBP - HSRP CCNP Lab

Written by LBSources from http://www.gns3-labs.com on June 21st, 2008 | 1 Comment

As per the original authoring thread:
In the RAR file is the .Net file, the Cisco GLBP Configuration Guide, saved configs for the 2 GLBP routers and the 3 PC’s and text files with the basic commands used to configure the devices and GLBP. The PC’s are 1710 routers and can run any IOS using 64Mb [...]

Topology: GNS3 CCENT Lab From Jeremy @ CiscoBlog

Written by LBSources from http://www.gns3-labs.com on June 6th, 2008 | 7 Comments

This lab was created by Jeremy of CiscoBlog.com. This lab is more of an exercise and does NOT include the configs.
Routers Used: c2621
IOS: c2600-i-mz.123-26.bin
Feature of Topology:
1) Basic setup of all Cisco routers
2) Configure all Cisco routers for SSH support
3) Configure IP connectivity and RIP routing support for Cisco network
4) Configure SDM support on all [...]



↓ Subscribe To GNS3-Labs ↓

Subscribe to GNS3 Labs :: Cisco Router Simulator Network Topologies