GNS3 Lab & Exercise: GNS3-Labs BSCI Lab OSPF Stub, Total Stub Areas & Route Redistribution
Written by LBSources from http://www.gns3-labs.com on April 9th, 2010 | 4 CommentsOk – So here is another CCNP BSCI / CCNA lab challenge. This lab is part of Chris Bryant’s CCNP lab manual. This is my second visit to these labs after completing the reading material and not having to look at a single bit of the guide for help to config this up! Impressive to [...]
GNS3 Lab & Exercise: OSPF Hub-And-Spoke & Virtual Links
Written by LBSources from http://www.gns3-labs.com on March 4th, 2010 | 7 CommentsOk – So here is another CCNP BSCI / CCNA lab challenge. This lab is part of Chris Bryant’s CCNP lab manual. I haven’t included the solutions yet – I’ll give it some time and post that later .. First work on completing the lab and getting it to all work per the challenge. Ok [...]
Topology: Chris Bryant OSPF Lab – 3640 Routers
Written by LBSources from http://www.gns3-labs.com on May 31st, 2008 | 7 CommentsThese are the setups for the Chris Bryant labs. So if you’re studying for your CCNP and working with Chris’ material this is what you need! Routers Used: 3640 IOS: c3640-jk9s-mz.124-16a Feature of Topology: OSPF labs from Chris Bryant CCNP Study package.
Topology: Chris Bryant Core Lab Architecture – 3640 Routers
Written by LBSources from http://www.gns3-labs.com on May 31st, 2008 | 5 CommentsThese are the setups for the Chris Bryant labs. So if you’re studying for your CCNP and working with Chris’ material this is what you need! Routers Used: 3640 IOS: c3640-jk9s-mz.124-16a Feature of Topology: Core lab from Chris Bryant CCNP Study package.








