GNS3 Lab & Exercise: EIGRP & OSPF Route Manipulation
Written by LBSources from http://www.gns3-labs.com on June 26th, 2010 | 3 CommentsSo here is another lab I put together based on some studies and reading recently. I basically put together the scenario, so if it’s lacking conveying the scenario in a professional manner, I apologize This is basically a simple route redistribution and route manipulation lab. Simple, but requires a few steps that will test your [...]
Packet Pushers Podcasts – Listen In!!!
Written by LBSources from http://www.gns3-labs.com on June 22nd, 2010 | 4 CommentsOk – So if you’re not up yet on the Packet Pushers, you’re totally missing out on some good network discussion (usually) hosted by @Etherealmind, @ECBanks & @Danhughes1234ie. The greatness about this podcast is it’s like sitting around and chatting it up with guys in your office or at a tech conference or on a project [...]
Using Microcore Linux in GNS3 To Simulate PC/Workstations/Computers
Written by LBSources from http://www.gns3-labs.com on June 20th, 2010 | 14 CommentsSo, you read in the latest release notes of GNS3 0.7.2 the ability to simulate PCs/Hosts/Workstation/Computers, etc and you dont know where to begin? Well, fellow Moderator of the GNS3 forums Kage, put together a very simple, clear and step by step document to getting started. Using Microcore Linux in GNS3 To Simulate PC/Workstations/Computers Thanks [...]
GNS3 Lab & Exercise: OSPF Case Study & Lab Scenario 2
Written by LBSources from http://www.gns3-labs.com on June 19th, 2010 | 3 CommentsHow are we doing? I’m continuing on working to complete this lab book and all the labs This is another OSPF related lab from the Cisco Networking Academy Lab Portfolio. No EIGRP or other protocols involved. This lab involves the use of sub-interfaces, which changes your frame-relay statements – watch out and don’t get too [...]
GNS3 Official Release: GNS3 0.7.2
Written by LBSources from http://www.gns3-labs.com on June 16th, 2010 | 9 CommentsYesterday the GNS3 team released the latest version of GNS3 in which a virtual host was introduced among plenty of other new features and fixes. The most anticipated addition is the virtual host capability. I’ve had the chance to debug this myself and I must say it works great! I’m kind of use to vpcs, [...]
GNS3 Lab & Exercise: EIGRP & OSPF Case Study – Lab Scenario
Written by LBSources from http://www.gns3-labs.com on June 12th, 2010 | 3 CommentsAlright – Moving on and getting into some lab scenarios. No need to explain too much, all the information is below. This is a lab from the Cisco Networking Academy Lab Portfolio. CCNP Building Scalable Internetworks (BSCI 642-901) Lab Portfolio (Cisco Networking Academy) Instructions Plan, design, and implement the complex International Travel Agency (ITA) EIGRP [...]
GNS3-Lab & Exercise – BGP Route Reflectors & Filters
Written by LBSources from http://www.gns3-labs.com on June 4th, 2010 | 2 CommentsHope you are all doing well and celebrating the achievement of your CCNP or preparing to sit the exam very soon! Good luck. Here goes the last of this BGP lab series – Next up? We’ll see! This lab will teach you how to configure a Route Reflector in BGP, you’ll learn how this type [...]
Subscribe to GNS3 Labs :: Cisco Router Simulator Network Topologies
