Archives

avatar

GNS3 Announcement: GNS3 on FreeBSD

Written by LBSources from http://www.gns3-labs.com on March 24th, 2009 | 3 Comments

Seems that all the hard work has paid off and GNS3 is now available on FreeBSD. This is directly from the GNS3.net site.

avatar

GNS3-Topology: EvilRouters-Weighting To Influence BGP Routing

Written by LBSources from http://www.gns3-labs.com on March 14th, 2009 | 5 Comments

This is an older lab that is part of the BGP series labs that Jeremy over at EvilRouters.net is building. The labs are great and they will surely serve someone some great lab experience by the time hes done with them all. This lab picks up from: EvilRouters.net – Configuring Basic BGP GNS3-Topology: EvilRouters- BGP [...]

avatar

Beginning-Saving and Exporting GNS3 Labs Including Router Configs & Screenshots

Written by LBSources from http://www.gns3-labs.com on March 13th, 2009 | 7 Comments

REPOST We have all experienced a time when working in GNS3 and we _think_ we saved the the topology and router configurations. So you open GNS3 and load that config, start them routers, watch them boot all the way to the painful prompt Would you like to enter the initial configuration dialog? [yes/no]: And your [...]

avatar

Core and 2 distribution blocks with L3 and L2 access switches

Written by pierky from http://pierky.tel/ on March 7th, 2009 | 25 Comments

I just arranged this lab I used when I was studying for CCNP, I hope someone will find it useful. We have a 2 distribution blocks network linked with the core layer; all elements are dual linked to the upstream layer for redundancy. Block 1 has L3 access switches, running EIGRP as stub routers. Distribution [...]



↓ Subscribe To GNS3-Labs ↓

Subscribe to GNS3 Labs :: Cisco Router Simulator Network Topologies


Show Love!

If you would like to donate for the time it takes to do all of this, feel free to use the link below. Thank you in advance for any contribution you make :)

Categories