So Josh (BlindHog) came around with part 2 pretty quick.

As per the his blog

This is part two of my gns3 switching tutorial series. In part 1, you learned how to use a 16 port network module (NM-16ESW) to simulate many features of a Cisco switch. In this tutorial, you will learn how to configure vlans on the switch and how to route between vlans with a ‘router on a stick’ configuration.

This ‘router on a stick’ tutorial is only one example of the many labs that can be created using the NM-16ESW module.

GNS3 - Switching lab part 2 (router on a stick)
Reference:GNS3 - How to build a switching lab Part 1

You can also find a full blown VLAN, 802.1q lab in action @ GNS3-Labs:: Topology: VLAN Trunking GNS3 Lab - 802.1Q - Router On A Stick

Enjoy

LB

Tags: 3640, BlindHog, GNS3 Video Tutorials, NM-16ESW, Switching