GNS3 Tutorials: BlindHog - How to build a switching lab Part 2
Written by LBSources from http://www.gns3-labs.com on July 29th, 2008 | 2 CommentsSo Josh (BlindHog) came around with part 2 pretty quick.
As per the his blog
This is part two of my gns3 switching tutorial series. In part 1, you learned how to use a 16 port network module (NM-16ESW) to simulate many features of a Cisco switch. In this tutorial, you will learn how to configure vlans on the switch and how to route between vlans with a ‘router on a stick’ configuration.
This ‘router on a stick’ tutorial is only one example of the many labs that can be created using the NM-16ESW module.
GNS3 - Switching lab part 2 (router on a stick)
Reference:GNS3 - How to build a switching lab Part 1
You can also find a full blown VLAN, 802.1q lab in action @ GNS3-Labs:: Topology: VLAN Trunking GNS3 Lab - 802.1Q - Router On A Stick
Enjoy
LB
14,980 views
Tags: 3640, BlindHog, GNS3 Video Tutorials, NM-16ESW, Switching
You can leave a response, or trackback from your own site.
Subscribe to GNS3 Labs :: Cisco Router Simulator Network Topologies
February 5th, 2010 at 1:41 am
Thank you for the great web site - a true resource, and one many people clearly enjoy thanks for sharing the info, keep up the good work going….
March 15th, 2010 at 2:59 pm
hi, what a great website you have.. it so helpful, especially for a newbie like me… I just want to ask, i have followed your video tutorial precisely.. But i still can not ping from the PC to the router… Do you know, what is the problem??