GNS3 Tutorials: BlindHog – How to build a switching lab
Written by LBSources from http://www.gns3-labs.com on July 25th, 2008 | 2 CommentsIn case you have had a look at our Topology: VLAN Trunking GNS3 Lab – 802.1Q – Router On A Stick & need some help with configurations have a look over at BlindHog.
As per BlindHog:
In this tutorial, you will learn how to build a Cisco switching lab … even though GNS3 cannot emulate a Cisco switch. I will show you how to use an NM-16ESW network module in a 3640 router to emulate a switching environment.
This tutorial is actually part one in a two part series. Part 2 will show you how to configure a “router on a stick”. A router on a stick is basically when a router is configured to route between two vlans with a single physical connection to the switch.
BlindHog – How to build a switching lab
Enjoy..
LBS
Tags: 3640, BlindHog, GNS3 Video Tutorials, NM-16ESW, Switching
You can leave a response, or trackback from your own site.
More from LBSources
- GNS3 Lab & Exercise: Inter-VLAN Routing using Catalyst Switch
- GNS3 Lab & Exercise: OSPF Case Study & Lab Scenario 3
- Petition Cisco for Educational IOS License!
- GNS3 Lab & Exercise: GNS3-Labs – BGP & EIGRP Case Study 4
- GNS3 Lab & Exercise: EIGRP & OSPF Route Manipulation
Subscribe to GNS3 Labs :: Cisco Router Simulator Network Topologies
November 16th, 2010 at 9:19 am
I work for a online community institution and find your content material extremely helpful for work we are managing.great work and look forward to much more blog content
June 15th, 2011 at 11:49 pm
please send me commnads which is used on NM-16esw switch