21 Responses to “Video: Configure SDM in GNS3”

1. LBSources
   July 11th, 2008 at 6:45 pm

   Here goes a great tutorial from brain bump on how to install ASDM in GNS3.

   http://www.brainbump.net/2008/07/how-to-install-and-enable-asdm-pix-firewall-using-gns3/

2. prabhat
   February 11th, 2009 at 3:00 am

   hello lbs its great to heat gns support sdm, i had tried it , it is going ok up to step 11. I had created fa 0/0 =10.10.2.1 255.255.255.0. I can ping 10.10.2.1, but i am not able to ping loopback interface 10.10.2.2 from R0.
   From PC i can ping 10.10.2.2, but cannot ping 10.10.2.1

3. nabil
   February 14th, 2009 at 7:28 am

   je cherche une video pour la configuration de mpls simple.tu peut m’envoi et merci

4. Williams Femi
   February 27th, 2009 at 10:44 am

   Hi,
   I am getting limited connectivity on my vista loopback adapter.
   How can I resolve this ? I have try many options but thy are not working.
   Thanks for your ungenty reply.
   Best regards,
   Williams.

5. Adam
   March 5th, 2009 at 10:18 am

   Hi,

   Very very nice video!

   I know already all

   Thanks

6. guled
   March 26th, 2009 at 9:02 pm

   thanks mate good job

7. rashad
   May 3rd, 2009 at 7:45 am

   thx u soo much.

   i followed the configration and i can ping from pc to router and vv
   but the problem is that when i tried to open sdm i got the msg that
   the path C:\prgrams file\cisco\common\common\launcher.html;router={ip add i used for router} is not exist
   how to solve that

   thanking you

8. Chirag
   September 3rd, 2009 at 1:31 pm

   I really appreciate the tutorial. I searched for such material a lot on the internet but fortunately came across this one. This is awesome. This cleared all my doubts.

   I once again thank you for such great stuff.

   Regards,

   Chirag Rao
   Network Engineer
   Motif India

9. Masaud
   September 9th, 2009 at 5:25 am

   Hello friend thks for such nice info.

   in my case the pc can ping router ip but router can not ping my pc ip,even its getting pc mac by arp(all setting are correct they are of same subnet 11.0.0.1 and 11.0.0.2 with subnet mask 255.0.0.0) .also when i connect through sdm then a screen with some jave script error appears(i have blocked popups).

   Please if you can help me in this regard.Thank you.

10. yuvraj
    October 22nd, 2009 at 10:10 am

    hello friend

    i got connection with router sucessfully.but after first authentication SDM takes too much longer time open(around 1 hours).i m having dell 1501 laptop with 1.5 gb ram ,i am using 7200 router for sdm.

    and configure with below command
    hostname router7200
    1.ip domain-name yuvraj.com
    2.crypto key generate rsa general-keys
    (1024)
    3.ip http server
    4.username yuvraj1 privileage 15 password don
    5.ip http authentication local

11. Bad_boy
    November 6th, 2009 at 2:51 pm

    I cant see any network device list not even one of them. I am using Vista 32 Bit. Can anyone help me?

12. Bad_boy
    November 6th, 2009 at 2:54 pm

    I get this error……….

    “Network adapters on this machine:

    Unable to create lock file “c7200_i0_lock”.
    VM default: unable to create instance!
    C7200: unable to create instance!

    Use as follows:
    F0/0 = NIO_gen_eth:\Device\NPF_{…}

13. kwaggarookdagga
    December 29th, 2009 at 11:43 pm

    HI
    I get a duplicated ip address error on my router and then my win 7 loopback revereds to a 192.168…. address altought I have given it the 10.10.2.2 address and the router 10.10.2.1 /24.
    Thnax in advance

14. David
    January 24th, 2010 at 4:31 pm

    Thanks for the video, very helpful!

15. Nishanth
    February 2nd, 2010 at 5:24 am

    @ masaud and prabhat..

    I had the same problem with pinging the loopback address from the console. The reason for me was windows firewall was blocking the pings across. Try disabling the firewall. It should work

    Nishanth_harrison

16. purplechap
    February 10th, 2010 at 1:46 pm

    @ masaud and prabhat:-
    i also had the same issue, after disabling firewall ,it really works.
    it works bcz of “Nishanth”. Big Thx to Nishanth.
    ————————————————
    @Bad_boy
    i had same issue:- you are using vista so just “turn off your user account control(UAC) from control panel. sure it will work.
    ————————————————-
    thanks for the video. it really helps me.

17. Khan
    March 7th, 2010 at 3:00 am

    Hi,
    when im trying to connect SDM with 7206VXR with image file name c7200-advipservicesk9-mz.124-2.T.bin. I m getting an error that http and https is not enabled on the router…do anyone know how to fix this problem

18. SDM Simulator. - TechExams.net IT Certification Forums
    March 10th, 2010 at 10:10 am

    [...] download and use Dynamips/GNS3 to use SDM, providing you have access to the correct IOS images. Video: Configure SDM in GNS3 | GNS3 Labs :: Cisco Router Simulator Network Topologies I wouldn’t worry too much about SDM for the exam. __________________ ICND1 - Passed 25/01/10 [...]

19. ccie2be
    March 22nd, 2010 at 11:21 pm

    @khan, you need to have username/password setup on your cisco router in gns3 and have http enabled also make sure your lan range is in different subnet to your microsoft loopback adaptor and have your router ip address according to loopback gateway.

20. ccie2be
    March 22nd, 2010 at 11:23 pm

    Also if you cannot click on some features in SDM then you need to downgrade your java to older version as there are compatibility issues with new SDM and java.

21. Syed Sajjad Hussain
    May 11th, 2010 at 12:39 am

    Dear All
    i have been using SDM with GNS3 and it was working fine. now i can ping from router to pc and pc to router but when i launch SDM it is not opening just keep waiting after initial window just a message on explorer “waiting for 192.168.1.1″ router interface to response. can any body help me out.
    Thanks

Leave a Reply