Video Tutorials: Setup VMWare In GNS3 and Dynamips-Dynagen And Simple Relay Lab
Written by LBSources from http://www.gns3-labs.com on June 17th, 2008 | 13 CommentsThese are links to videos created by Timw of hacki.at. Timw is a helpful guy on the forums over there and took time to create some videos on configuring VMWare to work with Dynamips/Dynagen & GNS3. In one of the Videos he also teaches you how to setup a simple frame-relay lab.
Video 1: VMWare Server Network Setup
Setting up a virtual network in VMWare Server for use with Dynamips, Dynagen and GNS3
Video 2: Frame Relay
How to use GNS3 to setup a Frame relay network using 2 routers and 2 virtual machines running in VMWare Server on a local work station.
Video 3: VMWare Server Network Setup 2
Shows how to create a virtual network adapter and then connect it to a Virtual machine using VMWare Server. After that it shows how to connect the Network Adapter to a cloud in GNS3.
Video 4: Saving Configs in GNS3
How to save your router configs using GNS3 0.5 Beta.
Labs & videos created by Timw @ 7200emu.hacki.at
Enjoy .. LBS
35,092 viewsTags: Dynagen, Dynamips, Frame-Relay, GNS3, GNS3 Topology, GNS3 Video Tutorial, VMWare
You can leave a response, or trackback from your own site.
Subscribe to GNS3 Labs :: Cisco Router Simulator Network Topologies
June 19th, 2008 at 12:05 pm
Any suggestions would be appreciated.
June 19th, 2008 at 1:17 pm
Awesome work Tim ..
October 11th, 2008 at 8:02 am
wonderful, thk a lot
January 21st, 2009 at 1:27 pm
Hello
I have a problem whene connecting GNS3 to VMware under ubuntu 8.10.
I made two subnetworks using a router so I can ping from the Virtual machines to the router but I can’t do the same thing from the router to thv virtual machines.
If you have any idea, please publish it.
January 23rd, 2009 at 8:58 pm
@Kim Sorry I dont really work with VMWare too much, but It may be something with the Gateways or NIC configurations on the VM server.
February 15th, 2009 at 1:44 pm
I cannot load the console session for my lab using the GNS3 having read the tutorials from your site and that of GNS3’s
Pls kindly assist me on what to do.
meanwhile i’m using windows server 2003 enterprise edition
expecting your response.
Regards
March 23rd, 2009 at 9:22 am
[...] include Virtual PC Simulator, you can find useful tutorial about GNS3 and VMware integration on gns3-labs.com or how to emulate a voice lab with the same tools on [...]
July 23rd, 2009 at 1:11 am
******************************NEED HELP********************************
will you please provide me NAT lab since i am confused how to make internet cloud on the router’s other end. I used to use VMWare and GNS3.0.6
August 11th, 2009 at 7:08 am
Thanks.This is best site
December 17th, 2009 at 7:36 am
iam not able to access the routers in gsn3 in virtual machine..its showing 209-unable to start vm ghost-win32sysloder.pyd-localhost.ghost..any one can help regarding this…
January 12th, 2010 at 6:39 pm
Hi
I am using VMware 7 to create some DSL boxes to connect to a router. But when I add the cloud to the topo and try to configure the cloud I only get vmnet 1 and 8 not the vmnet2 that I have configured with this.
Thanks in advance
January 29th, 2010 at 3:14 pm
hello
i m doing ccnp , but in gns3 i m failing in configuration of ipv6 on interface ,
i m doing like this
ipv6 add 2001:210:10:1::1/64
when i put the (/)
my ios say (unregcognized command)
please is there any one how have tried ipv6 in gns3,to solve my problem
uzairab@yahoo.com
June 22nd, 2010 at 5:34 pm
Dear all ,
how are you all please hellp me how to use juniper router in gns3 ? and how can i get the juniper junos.
thanks .