Topology: BlindHog How To Use PEMU as Your Personal Firewall
Written by LBSources from http://www.gns3-labs.com on June 5th, 2008 | 3 CommentsThese labs were built based on BlindHogs’ Use Pemu as your Personal Firewall
Routers Used: PIX
IOS: ASA 8.0.3
Feature of Topology:Use PEMU as your personal firewall for your home, work or test lab.
Image: 
Download: BlindHog - How To Use PEMU as Your Personal Firewall
Enjoy .. LBS
8,324 viewsTags: ASA, BlindHog, Firewall, PEMU, PIX
You can leave a response, or trackback from your own site.
Subscribe to GNS3 Labs :: Cisco Router Simulator Network Topologies
December 28th, 2008 at 10:48 am
Hi,
I have used the above topology, assigned correct ip addresses, but I can’t wither my ethernet or loopback interfaces. I have also opened access for icmp traffic on both inside and outside interface. the same topology with a router works fine. cloud - router - cloud. Any ideas why it’s not working?
also why I can’t connect directly to the cloud the pix’s interfaces?
thanks,
george
March 31st, 2009 at 11:43 am
Its same case with me too, I even tried a simpler topology
cloud(PC lo:10.1.1.2; GW:10.1.1.1)> switch> pix 7.2(inside e1:10.1.1.1)
unable to ping from pc to pix inside interface or vice versa.
I’m running GNS30.6 on winxp, have tried
debug icmp trace
icmp permit any echo inside
icmp permit any echo-reply inside
wireshark capture shows no echo request form pix
Please help..
March 20th, 2010 at 9:14 pm
try in mode config (in the asa)
icmp permit any echo
icmp permit any echo reply
sorry for my english, but i don`t write so good